|
Post by tx200 on Aug 15, 2007 15:36:26 GMT
wot modifications need to made to fit px engine into pk frame
|
|
|
Post by ADMIN on Aug 20, 2007 20:11:18 GMT
wot modifications need to made to fit px engine into pk frame Cut down the front engine mount (only the ends of the tube) move the rear shock mount lower on the engine (you will need a very good ally welder) and that is it
|
|
hess
Newbie
Posts: 1
|
Post by hess on Nov 7, 2007 12:52:24 GMT
you need a shorter shocker and to remount where it sits in the frame as the p range engine is longer and the shock has to lean to far forward and catches on the engine.
|
|